USB Charger for special machinery
USB Charger devices for special machinery indispensable for those who use modern electronics. USB Charger apply to trucks, tractors, forklifts, and concrete pumps for work DVRs, navigators, mobile phones. USB connectors Dekart suitable Bulldozer, Excavator, Crane, Truck Hoist and crane, Forklift, Concrete pump, Amour, Hammer.
For those who are accustomed to always have access to the gadgets and be on the USB connection for special equipment – just need. USB sockets allow operation when the differential input voltage from 6V to 30V. This means that to operate the device will be possible even in the most unusual circumstances. Charger for special equipment provides output voltage of 5 V with different current, which gives the opportunity for fast and reliable Charger of any gadget or device. Connectors with different power output current will allow to distribute the load in an optimal way. The housing is made of high quality plastic, excluding mechanical damage, dust and water, which is very important when carrying out construction works.
123Charger for vehicles TUC-CA23-BLK-GRN has 2 USB plugs, maximum output: 5V 3.1 A. Designed for charging gadgets and transport devices such as DVR and GPS on passenger transport.
This model is installed in a circular hole on a flat surface in an armchair or in the casing of a car, bus, trolley ..
$2.50
Ex Tax:$2.50
Hot
123Car USB Charger Mortise type TUC-CA23-BLK-BLU with 2 USB connectors, maximum output 5V 3.1A. Designed to power and charge portable equipment in transport via a USB cable.
This model of USB jack is installed in a round hole in the panel or in the casing of a car, bus, trolley bus, tram, electr..
$2.50
Ex Tax:$2.50
123The mortise charger for vehicles TUC-CA23-BLK-ORG is equipped with 2 USB connectors, with a voltage of 5V, maximum current 3.1A. The device is designed to charge portable equipment in passenger vehicles via a USB cable.
This model is installed in the seat in the chair or in the casing of a ca..
$2.50
Ex Tax:$2.50
123Car USB Charger TUC-CA23-BLK-RED has 2 USB connectors, voltage 5V, maximum current 3.1A. Operates as a charger to power your mobile devices in public transport.
The USB socket is placed in a circular hole on a flat surface in the panel or in the casing of a car, bus, trolley bus, tram, electr..
$2.50
Ex Tax:$2.50
123Charger for transport model TUC-CA23-BLK-WHT is equipped with 2 USB connectors, power supply 5V, maximum current 3.1A. The device is designed to charge mobile equipment in passenger vehicles via a USB cable.
The USB socket is placed in a round seat on a flat surface in the panel or in the cas..
$2.50
Ex Tax:$2.50
123The charger for the TUC-CA24-BLK-BLU transport models is equipped with 2 USB connectors, with a voltage of 5V, the maximum current is 4.2A. The device is designed to power mobile equipment in passenger vehicles through a USB cable.
This model is designed for a seat in a car, as well as a USB for ..
$3.00
Ex Tax:$3.00
123Car USB charging mortise model TUC-CA24-BLK-GRN equipped with 2 USB connectors, voltage 5V, maximum current 4.2A. Used as a power adapter for airborne equipment and charging mobile devices in passenger vehicles.
This model is placed in the seat in the seat or in the casing of a car, electric bus..
$3.00
Ex Tax:$3.00
123Car USB Charging TUC-CA24-BLK-RED has 2 USB connectors, 5V 4.2A output. Designed to charge portable equipment in cars and by public transport.
The device is installed in a circular hole on a flat surface in an armchair or in the casing of a car, electric bus, bus, trolley bus, tram, and other..
$3.00
Ex Tax:$3.00
New
123Car USB charging mortise model TUC-CB23-BLK-BLU equipped with 2 USB connectors, with a voltage of 5V current 4.2A output. The device is designed to power mobile equipment in public transport via a USB cable.
The charger case has 2 USB sockets, a rubber cap, and a blue light indicator. The case is..
$3.00
Ex Tax:$3.00
New
123Car USB charging model TUC-CB23-BLK-GRN is equipped with 2 USB connectors, voltage 5V current 4.2A output. Designed to power mobile devices in passenger vehicles, buses, trains, boats. This model is installed in a hole in the seat or in the casing of a car, bus, trolley, tram, electric bus, and othe..
$3.00
Ex Tax:$3.00
New
123USB port for transport, USB charging for an SUV, USB Chargers in a bus, charger in a subway car, USB charger for motor ships, USB connector for cranes, USB connectors
The mortise charger TUC-CB23-BLK-RED is equipped with 2 USB connectors, with a voltage of 5V 4.2A. The device is designed to power..
$3.00
Ex Tax:$3.00
New
123The charger for the transport model TUC-CB24-BLK-BLU has 2 USB connectors, 5V 4.2A output. Designed to charge portable equipment in public transport via a USB cable.
The device is placed in a round hole in the seat or in the casing of a trolley bus, tram, bus, car, electric bus, and other vehicle..
$3.50
Ex Tax:$3.50
New
123TUC-CB24-BLK-GRN mortise USB car charger has 2 USB connectors, 5V output 4.2A. Designed for charging mobile equipment in passenger vehicles via a USB cable.
This model is placed in a hole on a flat surface in an armchair or in the casing of a trolley bus, tram, electric bus, car, bus, and other v..
$3.50
Ex Tax:$3.50
New
123The charger for transport of the TUC-CB24-BLK-ORG model has 2 USB sockets, voltage 5V 4.2A. Designed for charging mobile devices on public transport via a USB cable.
This model is placed in a round seat in an armchair or in the casing of any vehicles: a trolley bus, car, tram, bus, electric bus. ..
$3.50
Ex Tax:$3.50
New
123The mortise charger TUC-CB24-BLK-RED has 2 USB connectors, with a voltage of 5V and a current of 4.2A. The device is designed to power mobile devices on public transport via a USB cable.
The charger module has 2 USB sockets, a rubber plug, and a red indicator light. The case is made of durable fl..
$3.50
Ex Tax:$3.50
New
123TUC-CB24-BLK-WHT mortise USB car charger is equipped with 2 USB connectors, with a voltage of 5V, current 4.2A at the output. The device is designed to power mobile equipment in public transport via a USB cable.
This model is placed in a round hole in the seat or in the casing of a trolley bus, c..
$3.50
Ex Tax:$3.50
New
123Car USB charging mortise model TUC-RA23-BLK-BLU equipped with 2 USB connectors, with a voltage of 5V current 3.1A output. Designed to power mobile devices in public transport.
This model is installed anywhere in transport interior. The device is made in a durable case for tapping into the interio..
$3.79
Ex Tax:$3.79
New
123The mortise charger TUC-RA23-BLK-GRN has 2 USB sockets, voltage 5V 3.1A. The device is designed to charge portable equipment in passenger vehicles via a USB cable.
The device is installed in a round seat in the chair or in the casing. Public transport USB Charging module is made in a black case f..
$3.79
Ex Tax:$3.79
New
123The TUC-RA23-BLK-ORG USB car charger is equipped with 2 USB connectors, 5V 3.1A output. Designed to power mobile equipment in passenger vehicles.
The USB charger is placed in a seat in the panel or in the interior. Dekart TUC-RA23-BLK-ORG is designed for installation in the interior of buses, tro..
$3.79
Ex Tax:$3.79
New
123Deakrt TUC-RA23-BLK-WHT Dual USB Socket Charger has 2 USB connectors, 5V current 3.1A output. The device is designed to power portable equipment on public transport.
The device is placed in a hole on a flat surface in the panel or in the interior of an electric bus, trolley bus, tram, bus, car, a..
$3.79
Ex Tax:$3.79
New
123The charger in vehicles TUC-RA23-BLK-RED is used in vehicles as a USB charger for passengers. It also serves as a USB power source for additional vehicle electronics.
The device is installed in a hole on a flat surface - for example in an armchair or in the interior of an electric bus, tram, car,..
$3.79
Ex Tax:$3.79
Showing 1 to 21 of 21 (1 Pages)